Sunday, September 30, 2012

Learning Your Craft

   This is something that we have harped on time and again. I often get emails from young beginning dolly grips asking what they can do to improve their skills, and thus, their hireability. Many are just out of college and have decided that this is a career they want to pursue. I always tell them,"Be a set grip first." I don't think you can be as effective as a dolly grip if you don't know the fundamentals of set lighting and rigging. Aside from this, there are a lot of subtle rules of behavior to working on a set. Unwritten laws abound in this business and you can often offend someone or put your ignorance on display for all to see, and have no idea what you did if you don't take the time to immerse yourself in set life and learn it's rhythms. This is not fun to hear I can imagine, but believe me, it makes all the difference in the world. It will teach you endurance and discipline. It will teach you the correct way to work and how to be as efficient as you can. You will learn to immediately assess a situation, formulate a plan, and attack, all the while ignoring the pouring rain, pitch dark, and freezing cold in which you're expected to perform.. As a dolly grip, you have little time to mull over the situation. You can't stand there and "ummm" and "uhhh" with a vacant look on your face as the operator or DP, or both, wait for your solution. You are constantly thinking a step ahead, and set gripping teaches you all this. If you're young and just out of college, don't worry, you have time, and all the more reason to take the proper steps and learn the job from the bottom and inside out. Aside from this, I can't tell you how many times the dolly grip has to take over the set if the key grip has to step away (and he will sooner or later). Now you're the defacto key grip. Any minute now, the DP will look over at you and ask if you can rig a camera in the ceiling, or fly a 20x20, or flag the condor, or set a double off an actor, or "Hollywood" a lenser. If you haven't been a set grip, odds are you have no idea and fumble for your radio trying to whisper that you need help. If you were a good set grip, you confidently take a second and give an answer, then you start feeding orders on the radio. Believe me, this will happen sooner or later. Take the time.

   OK, now you've been working the set for a couple of years. It's time to move on. You've probably been working with a key grip pretty regularly and you let him know you'd like to push dolly. Now, he can start throwing "B" camera jobs at you. Maybe an operator you're friendly with has a low budget show and he's willing to give you a shot. All of this is an opportunity to learn. Go to a rental house. Familiarize yourself with the dollies. They are the tools of your trade and you should be intimately familiar with what they can and can't do. Learn approximate lens heights for any configuration. Learn what you need to do a Lambda shot off the side. How about straight off the front? It's about making the operator comfortable while achieving the shot. How far do you offset the track?. Do you need to offset the track? You have to be right the first time. You don't want to be relaying it while the DP checks his watch. Get all the accessories out and learn what they do and how to attach them. If you're a Chapman user or vice versa, you still need to learn the other dolly because sooner or later you will end up pushing it. As a set grip, you've probably helped put a crane together  so you are already ahead on that. What are the rules for operating it? What's a sightline? These are things you have to learn. I can't tell you how many thirds I work with who don't know how to lay track. While you are a set grip, pull the dolly grip to the side and ask him to teach you. I pulled out a couple of sticks at lunch one day and taught one of the thirds how to do it after she asked me. That's all it took. Learn how to mark the wheels. Learn how to do a compound move. Then two or three in succession. Believe me, the time will come when you're on a dance floor and the operator keeps adding boom and floor marks and the more he adds, the harder you'll sweat unless you've put the time in and have learned how to remember, and then execute them. Do you know how to lay a floor? Again, something you will pick up as a set grip. You don't want to be trying to figure it out on your first job as "A" camera. How do you lay a floor across a half-inch drop off? It has to be smooth and even. If you've been a third, you already know.

   As you can see, there's more to it than hitting your marks. These are a fraction of the things a dolly grip has to know, and a lot of them he picks up as a set grip. It's like taking the core curriculum in college. You have to have it before you can graduate.

Wubba Wubbba. Doodle doodle dee.

As an added bonus, here's a great article by camera operator Dan Gold SOC on the importance of the Dolly Grip to the process. http://www.soc.org/index.php?id=27&article=47

Thursday, September 27, 2012

That's A Wrap: Show Round Up

 I apologize for being so sparse on the posts lately. I've been in the middle of a twelve week show and we just wrapped. All in all, it was a good one despite the problems we had early on with camera shake. We finally ironed it all out and it went smoothly from there. I had a fantastic camera and grip crew to work with (both in Atlanta and San Francisco). I give it a difficulty level of an even five. Almost every shot was a dolly or crane shot, but nothing really challenging, although I did have one fun dance floor move involving pulling through a set and timing the move to character dialogue. It was a lighthearted comedy and we spent a lot of time laughing. We did ten weeks in Atlanta and then moved cross country to San Francisco for the final two. Although I was the lone representative of the grip crew to travel, the guys in San Francisco were all great grips and great people. Now it's two weeks off and I start the next one.

Tools used: Hustler 4, Peewee3, and Fisher 10 dollies. 30', and 50' Technocrane from Cinemoves, and a 30' Moviebird as well as a Fisher 23 Jib. Remote heads were Libra and Scorpio. Cameras were Arri Alexas.

Now for two weeks vacation.....

Saturday, September 01, 2012

Cables

I ran over one a few weeks ago and it actually derailed the dolly. It ran it the %^&* off the track. The fracking thing is as thick as a welding cable. Is this progress? It's like 1945 again. I used to bitch about the tiny BNC cable that I had to trail along. In comparison to this donkey d&*ck I'm dragging around now, the BNC is like a gossamer strand, almost lighter than air. What I would give to have it back. It's my first video show. Everything up to now has had a film mag with the name Panavision or Arri on the side of it. So now I'm dealing with a shaky camera (apologies to Arriflex. I know you guys are dealing with the issue. I have great love for you), a cable that rivals the one they strung across the ocean floor in the 40's, and you still have to reload the thing every twenty something minutes and it takes LONGER. I often wonder, if video technology had come first, would film be the new big thing? Would we all be rolling our eyes at this "new" technology with it's whirring cameras and quaint "gate checks?" Plus, the eyepiece isn't long enough. I now have to set the dolly up on the wrong side for a Lambda Head shot because the eyepiece isn't long enough to get the operator's head out from under the camera offset (or, ubangi for those older than twenty-five. Yes, I still call it a ubangi. If I offend you, you clearly don't have a whole lot to live for. Grow a pair.) I realize I sound like one of the old cranky Dolly Grips I used to laugh at and say, " I'll never turn into that guy." but I was young and stupid. Meanwhile, there's a concert at the amphitheater about four miles away from my house and I can hear it while I'm trying to sleep. So, excuse me, I've got to call the cops and ask them to turn down that awful rock and roll racket.